@article { author = {شفاعی, سیدمجتبی and معصومی, امین‌اله and قیصری, جعفر}, title = {Design, Development and Evaluation of an Automatic Blade Depth Controller System for a Laser-Guided Land-Leveler}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {1-12}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102024}, abstract = {Excessive cutting depth during leveling of agricultural land increases power needed by the tractor drawbar and will result in undesirable slippage and excessive strain on the tractor engine.  The result of sustained excess will be the break-down of the tractor. An auxiliary blade depth controller to prevent overloading during leveling was designed, fabricated and evaluated in this study. The system consists of a closed loop that obtains the real tractor engine speed using a dynamo and compares the critical and desired speeds of the engine as controlled by the user by means of a manual keyboard. The data is recorded in the main microcontroller memory and displayed online on a LCD. The system governing the blade depth prevents attainment of critical engine speed that will cause overloading. The depth controller system overrides manual control and sends pulses to the solenoid valve to adjust the blade depth cylinder to decrease the depth of excavation until the desired engine speed is attained. After eliminating the risk of overload, the system switches blade command back to the laser control box. The system was evaluated on a laser-guided land leveler on farmland. Fuel consumption and field performance of the machine were determined with and without use of the proposed control system. The test was carried out using a t-test with five replications. The result demonstrated a significant difference at 5% probability for use of the proposed system (p < 0.05). The new system decreased fuel consumption 18.4% and increased field performance 19.7%, which makes it an effective cost-saving measure.}, keywords = {Closed Loop,Control System,Laser-Guided Land Leveling,Overload}, title_fa = {طراحی، ساخت و ارزیابی سامانه کنترل خودکار ارتفاع تیغه برای ماشین تسطیح لیزری}, abstract_fa = {در تسطیح لیزری نقاطی از زمین­های کشاورزی که ارتفاع خاکبرداری در آن­ها زیاد است، معمولا ماشین تسطیح به توانی بیش از توان کشش مالبندی تراکتور نیاز دارد. این امر موجب بیش­باری موتور و لغزش زیاد چرخ­های محرک تراکتور و در نهایت خاموش شدن تراکتور می­شود.  هدف اصلی در این تحقیق، مجهز کردن ماشین تسطیح لیزری به یک سامانه کنترل خودکار ارتفاع­کار تیغه به­­منظور جلوگیری از بیش­باری موتور تراکتور و خاموش شدن آن در حین تسطیح است.  این سامانه که متشکل از یک سیستم کنترلی حلقه بسته است، با دریافت دور موتور تراکتور از طریق مولد برق آن و مقایسه آن با دور بحرانی و مطلوب موتور (که توسط کاربر از طریق صفحه کلید آن به سامانه معرفی می­گردد)، در شرایط بیش­باری، با ارسال فرمان به جک تنظیم­کننده ارتفاع­کار تیغه، ارتفاع خاکبرداری را متناسب با توان تراکتور کنترل می­کند.  برای ثبت و مقایسه دور لحظه­ای موتور با دور بحرانی و دور مطلوب آن از یک میکروکنترلر استفاده شد.  مصرف سوخت و عملکرد مزرعه­ای ماشین تسطیح لیزری با و بدون سامانه کنترل خودکار، با آزمون تی در 5 تکرار مقایسه شد. نتایج نشان می­دهد که به­کارگیری سامانه ساخته شده می­تواند کار راننده را آسان کند و به­طور معنی­داری  (P<0.05)در کاهش مصرف سوخت و افزایش عملکرد مزرعه­ای ماشین تسطیح لیزری مؤثر باشد.  با نصب این سامانه، مصرف سوخت و مدت زمان کارکرد به ترتیب نزدیک به 4/18 و 7/19 درصد پایین آمد که از نظر اقتصادی باصرفه است.}, keywords_fa = {بیش‌باری,تسطیح لیزری,سامانه کنترلی,حلقه بسته}, url = {https://idser.areeo.ac.ir/article_102024.html}, eprint = {https://idser.areeo.ac.ir/article_102024_248af03809463b30de6206a67dfde403.pdf} } @article { author = {مهدیانی, محسن and طباطبایی کلور, رضا and گلزاریان, محمودرضا}, title = {Detection of Lettuce and Cabbage from Images Taken under Different Lighting Conditions Using an Elliptic Thresholding}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {13-26}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102025}, abstract = {Variations in lighting are a problem for visual systems. In the current research, a new thresholding method using a 3D Euclidian elliptical surface was defined and applied for plant detection purposes. The results showed that this method had lower type I error, type II error, total error and mean square error compared with those of conventional segmentation methods. The method was evaluated for detection of cabbage and lettuce from images. The results showed the proposed method located cabbages in the images with 85.26% accuracy. When the proposed method was combined with image-based shape features it identified lettuce from the images at 66.67% accuracy.}, keywords = {Computer vision,Shape-Independent Properties,Surface Threshold}, title_fa = {شناسایی گیاه کاهو و کلم در شرایط نوری مزرعه با استفاده از روش پیشنهادی آستانه‌گذاری پوسته‌ای}, abstract_fa = {تغییرات شدت نور از مشکلات موجود در دستگاه‌های مبتنی بر پردازش تصویر است.  در پژوهش حاضر به شناسایی گیاهکاهو و کلم از روی تصاویر تهیه ‌شده در شرایط متغیر نوری مزرعه با استفاده از روشی نوین پرداخته شده است.  شیوه جدید شناسایی توسط آستانه‌ای صورت می‌گیرد که در فضای اقلیدسی سه ‌بعدی قرار دارد و به‌صورت پوسته‌ای بیضی‌گون است و از مولفه روشنایی در ساختار خود استفاده می‌کند.  نتایج حاصل از به‌کارگیری این شیوه برای شناسایی تصویری گیاهان سبزرنگ در شرایط مزرعه نشان می‌دهد که شیوه پیشنهادی، نسبت به روش‌های متداول شناسایی گیاه، خطاهای نوع گیاهی، پس‌زمینه،مجموع و میانگین مربع خطای کمتری دارد.  نتایج ارزیابی شیوه پیشنهادی روی دو نمونه گیاه کاهو و کلم نشان می‌دهد که این شیوه قادر به شناسایی کلم با دقتی برابر با  26/85 درصد است و  در ترکیب این شیوه با خصوصیات شکلی برای شناسایی کاهو دقتی برابر با 67/66 درصد دارد.}, keywords_fa = {آستانه‌گذاری پوسته‌ای,بینایی ماشین,فاصله اقلیدسی}, url = {https://idser.areeo.ac.ir/article_102025.html}, eprint = {https://idser.areeo.ac.ir/article_102025_a7182711735d43519abfabcd699f180a.pdf} } @article { author = {غلامی, روناک and قنبرزاده, بابک and دهقان‌نیا, جلال and انتظامی, علی‌اکبر and ابوالقاسمی فخری, لیلا}, title = {Physicochemical Properties of Potato Starch-NCC Based Nanocomposites}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {27-38}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102026}, abstract = {This study investigated the effect of different concentrations of nanocrystalline cellulose (NCC) on the physical properties of starch-NCC nanocomposites. The nanoparticle distribution in the polymer matrix was investigated using x-ray diffraction. The heat resistance and mechanical properties of the film were measured by differential scanning calorimetry and tensile testing. Investigation of nanocomposite properties showed that the addition of NCC to starch film increased the moisture resistance of the film. With the addition of up to 9% NCC, the ultimate tensile strength of the nanocomposite samples increased from 5.9 to 7.64 MPa and the strain-to-break decreased from 34.82% to 20.66%. This trend was not significant for nanocomposite samples containing high concentrations of NCC (5%, 7%, 9%) because of their crystalline nature, the unique mechanical properties of the cellulose and the establishment of hydrogen bonds between the starch and cellulose nanoparticles. Investigation of thermal resistance of the nanocomposite samples showed that the addition of up to 9% NCC increased the melting point of the film from 218 to 251.5 °C. Increasing the NCC concentration decreased the glass transition temperature of the nanocomposite samples. The results show that the performance of the NCC differed in the amorphous and crystalline regions of the starch.}, keywords = {nanocomposite,NCC,starch}, title_fa = {بررسی خواص فیزیکی نانوکامپوزیت‌های بر پایه نشاسته سیب زمینی- نانوبلور ‌سلولز (NCC) استخراج شده از پنبه}, abstract_fa = {هدف از این تحقیق بررسی تأثیر افزودن غلظت­های مختلف نانوبلورهای ­سلولز بر خواص فیزیکی نانوکامپوزیت نشاسته حاوی نانوبلور ­سلولز است.  برای بررسی نحوه پخش نانوذرات در ماتریکس پلیمر، از آزمون پراش اشعه­X استفاده شد.  مقاومت حرارتی و خواص مکانیکی فیلم­های نانوکامپوزیت به ترتیب با آزمون گرماسنجی پویشی تفاضلیو آزمون کشش بررسی شد.  بررسی خواص فیزیکی نمونه­های نانوکامپوزیت نشان می­دهد که افزودن نانوبلورهای سلولز به فیلم نشاسته، مقاومت به رطوبت فیلم­ها را بهبود می­بخشد.  با افزودن نانوبلورهای سلولز از صفر تا 9 درصد، استحکام کششی  از 9/5 تا 64/7 مگاپاسکال افزایش می­یابد و کرنش تا نقطه پاره شدن از 82/34 درصد به 66/20 درصد می­رسد؛ اما روند کاهشی مشاهده شده در تغییرات کرنش در نقطه پاره شدن، در نانوکامپوزیت­های حاوی غلظت­های بالای نانوبلور ­سلولز (5، 7 و 9 درصد)، معنی­دار نیست.  بروز این ویژگی­ها را می­توان به ساختار منظم بلوری و استحکام کششی بالای نانوالیاف سلولز و برهم­کنش­های هیدروژنی بین نانوالیاف سلولز و زنجیره­های پلیمر نسبت داد.  بررسی مقاومت حرارتی نمونه­های نانوکامپوزیت نشان می­دهد که دمای ذوب فیلم نشاسته­ خالص 218 درجه سلسیوس است که با افزایش غلظت نانوذرات تا 9 درصد، به 5/251 درجه سلسیوس می­رسد؛ اما با افزایش غلظت نانوذرات، دمای انتقال شیشه­ای نمونه­های نانوکامپوزیت کاهش پیدا می­کند.  این نتایج نشان می­دهند که عملکرد نانوبلور ­سلولز در نواحی بی­شکل (آمورف) و بلوری نشاسته، متفاوت است.  نتایج آزمون پراش اشعه Xنشان می دهد در ساختار کامپوزیت نانوذرات خواص بلوری خود را حفظ می­کنند ولی موجب تغییر الگوی پراش نشاسته نمی­شوند.}, keywords_fa = {نانوبلور ‌سلولز,نانوکامپوزیت,نشاسته}, url = {https://idser.areeo.ac.ir/article_102026.html}, eprint = {https://idser.areeo.ac.ir/article_102026_a3543afdc10aba309ee3adf863140b0f.pdf} } @article { author = {رفتنی‌امیری, زینب and اکبری, سیدمیثم and علیمی, مزدک}, title = {Effect of Gum Tragacanth and Carboxymethyl Cellulose on Physicochemical and Sensory Properties of Mayonnaise}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {39-52}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102032}, abstract = {Gum is used to stabilize mayonnaise emulsion in industry. The present study investigated the effect of carboxymethyl cellulose (CMC) with gum tragacanth (T) on the physicochemical and sensory properties of mayonnaise after 1 and 30 d of storage. T contents from zero (control) to 100% in the CMC was used to produce mayonnaise. The results of rheology were analyzed using the Herschel-Bulkley model which indicated that all samples showed pseudoplastic behavior and exhibited weak gel-like behavior in the studied frequency range. The stability of the samples increased as the content of T increased to ≥50% after 30 d of storage. Results from color measurement showed that use of T at most concentrations decreased the L* and increased the a* and b* of the samples. The microstructural images and sensory evaluation showed no significant difference from the control over both periods of storage. The results of this study indicate that ≥50% T increased water binding capacity, stability, continuous phase viscosity, and rheological behavior and produced acceptable sensory scores confirming that it is appropriate for replacement of a percentage of CMC in the mayonnaise samples.}, keywords = {Carboxymethyl cellulose,gum tragacanth,Mayonnaise,Rheological Behavior}, title_fa = {بررسی تاثیر‌ صمغ‌های کتیرا و کربوکسی متیل سلولز بر خواص کیفی سس مایونز}, abstract_fa = {در صنعت، برای پایدارسازی امولسیون مایونز از صمغ استفاده می­شود.  هدف از این تحقیق، بررسی اثر صمغ کتیرا با کربوکسی متیل سلولز  بر خواص فیزیکوشیمیایی و حسی مایونز بعد از گذشت یک روز و سی روز پس از تولید است.  صمغ کتیرا در سطوح ترکیبی صفر (نمونه شاهد) تا صد درصد با کربوکسی متیل سلولز در تهیه مایونز استفاده شد.  نتایج آزمون رئولوژی تطبیق داده شده با مدل هرشل بالکی نشان می­دهد که همه نمونه­ها در دامنه فرکانس مورد مطالعه رفتار ژل­مانند ضعیف و رفتار سودوپلاستیک دارند.  پایداری نمونه­ها با افزایش غلظت اثر صمغ کتیرا از 50 درصد به بالا، بعد از سی روز نگهداری افزایش می­یابد.  نتایج رنگ­سنجی نشان می­دهد که صمغ کتیرا در اکثر غلظت­های مورد استفاده L* را کاهش و a*  و b* را افزایش می­دهد.  تصاویر ریزساختار و خواص حسی نمونه­ها در دو بازه زمانی نشان می­دهد که تفاوت معنی­داری بین نمونه­های آزمایش با نمونه شاهد وجود ندارد.  نتایج این تحقیق همچنین نشان می­دهد که اثر صمغ کتیرا در غلظت 50 درصد و بالاتر با کسب امتیازات حسی قابل قبول و پایداری بالا و رفتار رئولوژیکی مناسب، که احتمالا ناشی از افزایش قابلیت اتصال با آب و قابلیت نگهداری ویسکوزیته فاز پیوسته است، می­تواند با کربوکسی متیل سلولز در نمونه­های مایونز جابه­جا شود.}, keywords_fa = {رفتار رئولوژیکی,کتیرا,کربوکسی متیل سلولز,مایونز}, url = {https://idser.areeo.ac.ir/article_102032.html}, eprint = {https://idser.areeo.ac.ir/article_102032_df1565495782f72c0923c8f39a21bf2f.pdf} } @article { author = {مرادی دزفولی, پریناز and هاشمی, مریم and موسیوند, مریم and خسروشاهلی, محمود}, title = {Molecular and Catalytic Characterization of Acidophilic Xylanase Bacillus Subtilis K40b}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {53-64}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102027}, abstract = {Bacillus subtilis K40b was isolated from rice rhizospheres and its potential for production of xylanase was evaluated using biochemical methods. The gene for xylanase in B. subtilis K40b was amplified, sequenced and assigned to the NCBI Genebank. The gene size was estimated to be 563 bp encoding 413 amino acids. Comparison of the xylanase gene with reference sequences showed that the xylanase of B. subtilis k40b belongs to the glycosyl hydrolyase family 11 (GH11) and was closely related to Bacillus xylanase. Response surface methodology using a central composite design was applied to determine the optimum temperature and pH of the xylanase B. subtilis K40b catalytic activity. Testing was carried out at temperatures of 25 to 75 °C and pH values of 4.5 to 8.5. ANOVA was used to derive a quadratic model equation for prediction of enzyme activity. Results showed that the optimal conditions for xylanase activity were 6.5 pH and 50°C. Alkaline pH and temperatures >70°C and <50°C resulted in a noticeable decrease in xylanase activity.}, keywords = {Bacillus subtilis,Central composite design,response surface methodology,xylanase}, title_fa = {تعیین ویژگی‏های مولکولی و کاتالیتیکی آنزیم زایلاناز اسیددوست باسیلوس سابتیلیس K40b}, abstract_fa = {در بررسی حاضر سویه باسیلوس سابتیلیسK40b  از ریزوسفر برنج جدا و پتانسیل تولید آنزیم زایلاناز آن با استفاده از روش بیوشیمیایی ارزیابی شد.  حضور ژن زایلاناز در سویه K40b به روش مولکولی ردیابی و پس از تعیین توالی در بانک ژن مرکز اطلاعات زیست فناوری ثبت شد.  توالی این ژن شامل 563 نوکلئوتید است که یک رشته پپتیدی 187 اسید آمینه‏ای را کد می‏کند.  مقایسه توالی ژن زایلاناز سویه مورد بررسی با توالی‏های مرجع نشان می‏دهد که آنزیم تولید شده توسط سویه باسیلوس سابتیلیس K40b متعلق به خانواده 11 گلیگوزید هیدرولاز است و بالاترین شباهت را به زایلانازهای باسیلوسی دارد.  روش سطح پاسخ با استفاده از طرح مرکب مرکزی نیز به منظور تعیین دما و pH بهینه فعالیت کاتالیتیکی آنزیم زایلاناز تولید شده به­کار گرفته شد.  دامنه مورد بررسی متغیرهای دما و pH در این مطالعه به­ترتیب 75-25 درجه سلسیوس و5/8-5/4 بود.  بر اساس نتایج حاصل از آنالیز واریانس، مدل درجه دوم به­عنوان مدل مناسب برای پیش­بینی متغیر پاسخ (فعالیت آنزیم زایلاناز) پیشنهاد شد.  نتایج نشان می‏دهد که آنزیم زایلاناز تولید شده توسط سویه مورد بررسی در pH بین 2/5 تا 2/6 و دمای 50 تا 60 درجه سلسیوس بیشترین فعالیت را دارد.  همچنین، بر اساس نتایج بهینه­سازی مشخص شد که pH قلیایی و دمای بیشتر از 70 و کمتر از 50 درجه سلسیوس نیز موجب کاهش قابل توجهی در فعالیت کاتالیتیکی آنزیم خواهد شد.}, keywords_fa = {باسیلوس سابتیلیس,روش سطح پاسخ,زایلاناز,طرح مرکب مرکزی}, url = {https://idser.areeo.ac.ir/article_102027.html}, eprint = {https://idser.areeo.ac.ir/article_102027_42b065b74f4f67ba26efa0950a29eccc.pdf} } @article { author = {قائمی, علی‌اصغر and امین دین, احسان}, title = {Effect of Treated Municipal Wastewater Disbursed by Drip Irrigation on the Chemical Characteristics of Soil}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {65-78}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102028}, abstract = {Recent drought has increased the consumption of fresh water resources to peak values in most parts of Iran. Water resources managers and planners have been forced to consider the use of all conventional and marginal-quality water (water of low quality) sources during planning. One of these marginal sources is treated municipal wastewater. The present study investigated the effects of the use of a drip irrigation system dispersing municipally-treated wastewater from the city of Shiraz on the chemical characteristics of clay loam soil in Badjgah in Fars province. Six water quality parameters were examined for treatments using freshwater, treated wastewater and fertilizer to irrigate broccoli. The results showed that application of treated municipal wastewater significantly increased the pH, SAR, and OC of the soil over that of the other treatments at 5% probability. Concentration of most chemical elements, such as nitrogen, potassium, and magnesium, and heavy metals, such as zinc, iron and lead, increased significantly increased at 5% probability for the wastewater treatment over the values for the other treatments.}, keywords = {Marginal-Quality Water,Micro-Irrigation,Soil Chemical Characteristics,Soil pollution}, title_fa = {بررسی تاثیر کاربرد فاضلاب تصفیه ‌شده شهری بر ویژگی‌های شیمیایی خاک در آبیاری قطره‌ای سطحی}, abstract_fa = {خشکسالی­­های اخیر موجب شده­ است که بهره­برداری از منابع موجود آب­های با کیفیت بالا در اکثر مناطق کشور به اوج  برسد و برنامه­ریزان و مدیران منابع آب را مجبور ساخته تا در برنامه­ریزی­های خود، به کلیه منابع آب متعارف و غیرمتعارف توجه کنند؛ یکی از این منابع، فاضلاب تصفیه ­شده شهری است.  هدف از این تحقیق، بررسی اثر کاربرد فاضلاب تصفیه ­شده شهری شیراز بر خصوصیات شیمیایی خاک منطقه باجگاه فارس با بافت لوم­رسی است.  برای اجرای پژوهش حاضر، از شش تیمار آب آبیاری (آب چاه، آب چاه به همراه کود شیمیایی، فاضلاب تصفیه ­شده شهری، فاضلاب تصفیه­ شده شهری به‌ همراه کود شیمیایی، آب چاه به همراه فاضلاب تصفیه­ شده، آب چاه به‌ همراه فاضلاب تصفیه­ شده و کود شیمیایی) در آبیاری قطره‌ای برای کاشت کلم بروکلی استفاده شد.  نتایج آزمون آماری دانکن نشان می­دهد که استفاده از فاضلاب تصفیه ­شده، در مقایسه با آب چاه (شاهد) باعث افزایش معنی­دار ویژگی­های شیمیایی خاک (اسدیته، نسبت جذب سدیم و کربن آلی) در سطح احتمال 5 درصد می­­شود؛ همچنین، غلظت اکثر عناصر پرمصرف و کم­مصرف گیاهی در خاک از جمله نیتروژن، پتاسیم، منیزیم و همچنین فلزات سنگین مانند آهن، روی و سرب در نتیجه استفاده از فاضلاب تصفیه­ شده، نسبت به آب چاه، در سطح احتمال 5 درصد افزایش می­یابد.}, keywords_fa = {آب‌های غیر متعارف,آلودگی خاک,خرد آبیاری,عناصر شیمیایی}, url = {https://idser.areeo.ac.ir/article_102028.html}, eprint = {https://idser.areeo.ac.ir/article_102028_ac5261782a57bebd6ff244d7f06a8cd5.pdf} } @article { author = {بهراملو, رضا and بانژاد, حسین}, title = {Relationship between Compressive Strength and Durability in Concrete Linings of Irrigation Canals in Hamedan, Iran}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {79-92}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102029}, abstract = {Concrete is the most common material used to line irrigation canals and must maintain its durability for the lifetime of the canal. Compressive strength has been used as an index to control the quality of concrete; concrete that remains durable under freeze-thaw conditions is that with high compressive strength. Research has shown that concrete linings can show suitable compressive strength in the first days of existence, but begin to decompose after a period and lose the property of durability. The present study examined the relationship between compressive strength and the durability parameters of initial water absorption, final water absorption, water penetration depth and porosity in the Variyaneh and Dingel-e Kahriz irrigation canals in the province of Hamedan.  Laboratory testing was carried out on 27 cores (69 mm in diameter; different lengths) extracted from the concrete linings of canals. The cores were prepared and their compressive strength and durability parameters were determined. The results show an inverse linear relationship between the compressive strength and density of the samples and their porosity. The durability parameters of initial water absorption, final water absorption, and water penetration depth showed no significant relationship. The results indicate that compressive strength is not sufficient for evaluation of the durability of concrete lining. Of the 27 cores, 40% had acceptable compressive strength. Of these, 50% showed acceptable durability parameters for exposure to freeze-thaw. The results also showed that the mean penetration depth and porosity of the samples were >2.5 times greater than the maximum recommended values and that the initial and total water absorption values were >1.5 times greater than the maximum recommended values. It is evident that the concrete linings will decompose more quickly than the anticipated lifetime from the influence of water and other expansive solute solutions in cold weather. It was noted that samples having similar compressive strengths had durability parameters that were greater or less than acceptable values. These results suggest that the compressive strength of concrete alone is insufficient to ensure durability and it is necessary to examine additional parameters affecting the lifetime of the concrete linings.}, keywords = {compressive strength,Concrete Lining,durability,Irrigation Canals}, title_fa = {بررسی رابطه پارامترهای دوام و مقاومت فشاری در پوشش بتنی کانال‌های آبیاری (مطالعه موردی در همدان)}, abstract_fa = {بتن با دوام بتنی است که قابلیت خدمت­رسانی خود را در طول عمر پروژه و در شرایط مختلف حفظ کند.  بر اساس منابع موجود، برخی از پوشش­های بتنی که در روزهای اولیه اجرا دارای مقاومت فشاری مناسبی هستند، به­دلیل نداشتن دوام، بعد از مدت زمانی دچار تخریب شده­اند.  در این پژوهش، رابطه بین پارامترهای مختلف دوام (جذب آب اولیه، جذب آب نهایی، عمق نفوذ آب و تخلخل) با پارامتر مقاومت فشاری در پوشش بتنی کانال­های آبیاری وراینه و دینگله­ کهریز در استان همدان بررسی شده است.  برای این منظور از پوشش بتنی این کانال­ها به­ترتیب 15 و 12 مغزه بتنی به قطر 69 میلی­متر و با طول متفاوت تهیه و پارامترهای دوام و مقاومت فشاری آنها در آزمایشگاه تعیین گردید.  بر اساس نتایج این پژوهش مشخص شد که پاره­ای از پارامترهای دوام با مقاومت فشاری مغزه­ها، رابطه خطی ندارند که بتوان با بالا بودن مقاومت فشاری از دوام نمونه­ها نیز اطمینان داشت.  لذا در ارزیابی کیفیت دوام پوشش بتنی برای شرایط یخبندان، نمی­توان تنها به مقاومت فشاری اکتفا کرد.  از کل نمونه­های تهیه شده در کانال­های وراینه (15 مغزه) و دینگله کهریز (12 مغزه)، به­ترتیب 6 و 4 مورد از مغزه­ها (40 و 34 درصد) دارای مقاومت فشاری بالاتر از حداقل توصیه شده بودند.  از بین مغزه­هایی با مقاومت فشاری قابل قبول به ترتیب 3 و 2 نمونه (50 درصد نمونه­هایی با مقاومت فشاری قابل قبول) به­رغم مقاومت بالا، مشخصات دوام قابل قبول را برای جلوگیری از تخریب در شرایط یخبندان و ذوب مکرر نداشتند.  نتایج بررسی­ها نشان می­دهد که عمق نفوذ آب و تخلخل متوسط مغزه­ها بیش از 5/2 برابر و جذب آب اولیه و نهایی متوسط مغزه­ها بیش از 5/1 برابر مقدار مجاز است که بیانگر فضاهای کرمو و متصل به همدیگر و محیط مناسب برای نفوذ و تجمع آب و ایجاد یخبندان و تخریب می­باشد.  همچنین نتایج بررسی­ها نشان می­دهد که برخی از نمونه­ها با پارامترهای دوام مختلف (کمتر یا بیشتر از حد مجاز برای شرایط یخ زدن و ذوب شدن مکرر) دارای مقاومت فشاری نسبتا ثابت هستند.  از این رو با داشتن مقدار مقاومت فشاری قابل قبول نمی­توان از با دوام بودن پوشش اطمینان داشت و برای این منظور لازم است آزمایش­های خاص مربوط به دوام را اجرا کرد.   }, keywords_fa = {پوشش بتنی,دوام,کانال‌های آبیاری,مقاومت فشاری,همدان}, url = {https://idser.areeo.ac.ir/article_102029.html}, eprint = {https://idser.areeo.ac.ir/article_102029_b5f4737360a9e7fc435354c35c00a536.pdf} } @article { author = {نوروزیان, کامیار and عباسی, نادر and عابدی کوپایی, جهانگیر}, title = {Application 0f Sewage Sludge Ash to Improve Engineering Properties of Clay Soil in Water Structures}, journal = {Irrigation and Drainage Structures Engineering Research}, volume = {15}, number = {4}, pages = {93-108}, year = {2015}, publisher = {Agricultural Engineering Research Institute}, issn = {2476-4000}, eissn = {2476-4019}, doi = {10.22092/aridse.2015.102030}, abstract = {Different additives have been considered to improve stabilization of the engineering properties of fine-grained soil. The present study investigated the effect of the addition of sewage sludge ash on the compressive strength of clay soil at optimum moisture content and under saturated conditions. The four treatments tested were the addition of 0%, 5%, 10% and 15% sewage sludge ash to clayey soil. The compaction characteristics of the treatments were determined using a Harvard compaction test. Then 24 specimens from each treatment were prepared at curing times of 7, 14, 28 and 90 days. Testing included three replications for a total of 96 specimens created using a Harvard compaction mold. The specimens were subjected to unconfined compressive strength tests. The results showed that increasing the sewage sludge ash content of the soil decreased the maximum dry unit weight and increased the optimum moisture content. The compressive strength of the soil treated with sewage sludge ash increased for both the optimum moisture and saturated conditions. It was found that the compressive strength of the treated soil significantly increased as the curing time increased.}, keywords = {Clayey Soil,Harvard Compaction,Sewage Sludge Ash,Standard Compaction,Unconfined Compressive Strength}, title_fa = {استفاده از خاکستر لجن فاضلاب برای بهبود خواص مهندسی خاک‌های رسی در سازه‌‌های آبی}, abstract_fa = {استفاده از مواد افزودنی مختلف برای بهبود خواص مهندسی خاک­های ریزدانه همواره به­عنوان یکی از روش­های تثبیت خاک مورد توجه بوده است.  در این تحقیق، تاثیر خاکستر لجن فاضلاب بر مقاومت فشاری خاک رسی در دو حالت با رطوبت بهینه و اشباع بررسی شده است.  بدین منظور، با افزودن مقادیر مختلفی از خاکستر لجن فاضلاب شامل؛ صفر، 5، 10 و 15 درصد به خاک رسی، چهار نوع مخلوط (تیمار آزمایشی) ساخته شد.  مشخصات تراکمی هر یک از تیمارها با استفاده از آزمایش تراکم هاروارد تعیین شد.  با در نظر گرفتن چهار سن عمل­آوری (7، 14، 28 و 90 روزه) و سه تکرار، 24 نمونه آزمایشی از هر تیمار و در مجموع 96 نمونه آزمایشی با استفاده از قالب تراکم هاروارد تهیه شد و پس از عمل­آوری در سنین مورد نظر، آزمایش­های مقاومت فشاری محصور نشده روی آنها اجرا شد.  نتایج به­دست آمده از این پژوهش نشان می­دهد که با افزایش مقدار خاکستر لجن فاضلاب به خاک، وزن واحد حجم خشک کاهش و رطوبت بهینه افزایش یافته است.  همچنین، افزایش خاکستر لجن فاضلاب مقاومت فشاری خاک را در دو حالت با رطوبت بهینه و اشباع افزایش داده است.  این افزایش مقاومت معنی­دار در سطح یک درصد (با احتمال 99 درصد)، متاثر از زمان عمل­آوری و مقادیر خاکستر لجن فاضلاب است.}, keywords_fa = {تراکم استاندارد,تراکم هاروارد,خاک رسی,خاکستر لجن فاضلاب,مقاومت فشاری محصور نشده}, url = {https://idser.areeo.ac.ir/article_102030.html}, eprint = {https://idser.areeo.ac.ir/article_102030_7b631d7ca2e96123c46abf3f771af42a.pdf} }