Abbasi, A. A. 2003. Experimental investigation of sediment control at lateral intakes. PhD. Thesis. Hydraulic Engineering. Tarbiat Modares University. (in Farsi)
Ahmed, M. 1953. Experimental on design and behavior of spur dikes. Proc. Cong. IAHR.
Barbhuiya, A. K. and Dey, S. 2004. Turbulent flow measurement by the ADV in the vicinity of a rectangular cross-section cylinder placed at a channel sidewall, flow measurement and instrumentation. Sci. Direct. 15, 221-237.
Barkdoll, B. D., Ettema, R. and Odgaard, J. 1999. Sediment control at lateral diversion: limits and enhancements to vane use. J. Hydraulic Eng. ASCE. 125(8): 862-870.
Emam, A. 1995. Investigating of submerged vane array on rivers behavior. M.Sc. Thesis. Hydraulic Structure Engineering. Tehran University. (in Farsi)
Ettema, R. and Muste, M. 2004. Scale effects in flume experiments on flow around a spur dike in flatbed channel. J. Hydraulic Eng. ASCE. 137(4): 635-646.
Garde R. J., Subramanya, K., Nambudripad, K. D. 1961. Study of scour around spur-dikes. J. Hydraulic Eng. ASCE. 87, 23–37
Ghalani, A. 1998. Laboratory investigation of submerged vane’s angle effect on their performance at intakes. M.Sc. Thesis. Hydraulic Engineering. Tarbiat Modares University. (in Farsi)
Hassanpour, F. 2006. Performance of lateral intake with compound submerged vanes and sill. PhD. Thesis. Hydraulic Structure Engineering. Tarbiat Modares University. (in Farsi)
Hsu, C. C., Tang, C. J., Lee, W. J., and Shieh, M. Y. 2002. Subcritical 90° equal-width open-channel dividing flow. J. Hydraulic Eng. ASCE. 128(7):716-720.
Johnson, P. A., Hey, R. D., Tessier, M. and Rosgen D. L. 2001. Use of vanes for control of scour at vertical wall abutments. J. Hydraulic Eng. ASCE. 127(9): 772-778.
Kuhnle, R. A., Alonso, C. V. and Shields, F. D. 1999. Geometry of scour holes associated with 90° spur dikes. J. Hydraulic Eng. ASCE. 125(9): 972-978.
Marelius, F. 2001. Experimental Investigation of Submerged Vanes as means of Beach Protection. Coastal Eng. 42, 1-16.
Marelius, F. and Sinha, S. K. 1998. Experimental investigations on flow past submerged vanes. J. Hydraulic Eng. ASCE. 124(5): 542-545.
Melville, B. W. 1992. Local scour at bridge abutments. J. Hydraulic Eng. ASCE. 118(4): 615–631.
Melville, B. W. and Coleman, S. 2000.Bridge Scour. Water Resources Pub. Littleton. Colo.
Nakato, T., Ogden, F. L. 1998. Sediment control at water intakes along sand-bed rivers. J. Hydraulic Eng. ASCE. 124(6): 589-596.
Neary, V. S. and Sotiropoulos, F. 1996. Numerical investigation of laminar flows through 90° diversions of rectangular cross-section. Comp. Fluids. 25(2): 95–118.
Neary, V. S., Sotiropoulos, F. and Odgaard, A. J. 1999. Three-dimensional numerical model of lateral-intake inflows. J. Hydraulic Eng. ASCE. 125(2): 126-140.
Odgaard, J. and Wang, Y. 1991a. Sediment management with submerged vanes, I: Theory. J. Hydraulic Eng. ASCE. 117 (3): 267-283.
Odgaard, J. and Wang, Y. 1991b. Sediment management with submerged vanes, ii: applications. J. Hydraulic Eng. ASCE. 117(3): 284-302.
Ramamurthy, A. S., Junying, Q. and Diep, V. 2007. Numerical and experimental study of dividing open-channel flows. J. Hydraulic Eng. ASCE. 133 (10):1135-1144.
Sajedi Sabegh, M. and Habibi, M. 2003. Laboratory investigation of using submerged vane and dikes on efficiency of intakes. Proceeding of the 4th hydraulic conf.35-42 (in Farsi)
Solaymani Osbooei, H. R. 1996. Investigation of submerged vane array on rivers bed morphology. M.Sc. Thesis. Environmental Engineering. Tehran University. (in Farsi)
Voisin, A. and Townsend, R. D. 2002. Model testing of submerged vanes in strongly curved narrow channel bends. Canadian J. Civil Eng. 29, 37-49.
Wang, Y., Odgaard, J., Melville, B. W. and Jain, S. C. 1996. Sediment control at water intakes. J. Hydraulic Eng. ASCE. 122(6): 353-356.
)